Part 3: Engine & Transmission on the Speedway Motors 1968 C10 Build
By Joe McCullough - Images by the Author
Catch Up Here:
The Speedway Motors ’68 C10 Build Part 1
Speedway Motors’ 1968 C10 Build Part 2:...
Day Two 1968 Chevelle Restomod
By Scotty Lachenauer - Images by the Author
There is no substitute for experience, and no one knows that better than Limerick, Pennsylvania’s own Mark...
Mint Mercury Monterey
A Timeless Classic Subtly Reimagined by John St. Germain
By Chuck Vranas - Photography By the Author
It takes a true craftsman with an eye focused...
MR’s Featured New Products For Your Hot Rod – 2024
Design Engineering’s Spray On Sound Deadening
The Advanced Thermal Acoustic Coating is a spray-on, roll-/brush-on, two-in-one sound and heat barrier for hot rod interiors that...
LS Powered Ford F100
By Scotty Lachenauer - Images by the Author
When Kyle Weichold bought his ’56 Ford F-100 he had a good mind to put modern Blue...
Latest Articles
Mild Pro Touring 1970 Camaro
By Nick Licata - Images by Patrick Lauder
During Mike Casey’s high school days, the muscle car and hot rod magazine world was thriving. It...
Firing Up – Recognizing Small-Block, Big-Block, and LS Engines
By Nick Licata
Every few months I feel it’s important to check in with our loyal readers to make sure we are staying on point...
Day Two 1968 Chevelle Restomod
By Scotty Lachenauer - Images by the Author
There is no substitute for experience, and no one knows that better than Limerick, Pennsylvania’s own Mark...
TIG Welding Tips and Tricks
By Ryan Manson - Images by the Author
For most, our first foray in the world of fabrication, at least as far as welding is...
How to Rebuild C3 Corvette Brake Calipers on a Budget
By Jeff Huneycutt - Images by the Author
The whole point of turning wrenches on your own car is to experience the satisfaction of getting...
1969 Yenko Camaro Restored to Perfection
By John Machaqueiro - Images by the Author
In the automotive world, some words that are uttered transcend brand loyalty and command respect without a...
Round Two – Chevy Muscle Cars From the Second Annual Triple Crown of Rodding
By Nick Licata - Images by the Author
When car show promoters dive into the second time running a highly successful inaugural event it’s typically...
Pro Street 1957 Chevy
By Nick Licata - Images by Wes Allison
Dave Roberts, owner of this extremely potent ’57 Chevy is by no means related to the Los...
Small-Block Appearing LS Engine Build
By Jeff Huneycutt - Images by the Author
This is the opposite of putting lipstick on a pig (or whatever you want to call it).
We’re...
Setting Bearing Clearance
By Jeff Smith - Photography by the Author
When it comes to assembling your next engine, the process of setting bearing clearances can be a...
Our digital and print versions offer tons of exclusive content not offered here.
Latest Content - All Chevy Performance
Round Two – Chevy Muscle Cars From the Second Annual Triple Crown of Rodding
By Nick Licata - Images by the Author
When car show promoters dive into the second time running a highly successful inaugural event it’s typically...
A Guide to Steel Wheels for Chevy Cruisers and Muscle Cars
By Tommy Lee Byrd - Images by the Author
Tires and wheels are the number one way to personalize a car. The Big Three manufacturers...
1962 Chevy Bel Air Resto
By Nick Licata - Images by NotStock Photography
The ’62 Chevy is iconic in several ways; the sexy lines were attractive in 1962 and remain...
Latest Articles
A Short Story: Cutting a 1963-72 Longbed Chevy/GMC Down to Size
By Ron Ceridono - Images by CTP Staff
In the July 2024 editorial in Classic Truck Performance magazine, editor Rob Fortier covered the so-called controversy...
Part 3: Engine & Transmission on the Speedway Motors 1968 C10 Build
By Joe McCullough - Images by the Author
Catch Up Here:
The Speedway Motors ’68 C10 Build Part 1
Speedway Motors’ 1968 C10 Build Part 2:...
LS Powered Ford F100
By Scotty Lachenauer - Images by the Author
When Kyle Weichold bought his ’56 Ford F-100 he had a good mind to put modern Blue...
Part 8: Custom Grille & Taillights on the Scott’s Hotrods ’N Customs 1951 Chevy
By Kenneth “Stress Ball” DeKissere - Images by Camren Beattie
Get Up To Speed Here:
Part 1: Brian Schutte’s 1951 Chevy Five-Window Truck
Part 2: Scott’s Hotrods N Customs...
Shane Dutka’s Tire-Searing ’71 Ford F100 Sport Custom
By Chuck Vranas - Images by the Author
In a Chevy-heavy world of classic trucks packed with LS power and platform conversions, it’s a breath...
Our Pick of Performance Parts For Your Classic Truck 2024
ALL AMERICAN BLING
All American Billet is proud to announce they are offering all their front-drive systems in a chrome finish! They are made with...
Matt de los Cobos’ 1972 Chevy Blazer, a Two-Door Family Funster
By Rob Fortier & the Owner - Images by Tim Sutton
I love a good story, especially from a fellow Chevy guy—and I really love...
Our digital and print versions offer tons of exclusive content not offered here.
Latest Content - Classic Truck Performance
Firing Up – Recognizing Small-Block, Big-Block, and LS Engines
By Nick Licata
Every few months I feel it’s important to check in with our loyal readers to make sure we are staying on point...
Part 3: Engine & Transmission on the Speedway Motors 1968 C10 Build
By Joe McCullough - Images by the Author
Catch Up Here:
The Speedway Motors ’68 C10 Build Part 1
Speedway Motors’ 1968 C10 Build Part 2:...
Steele Rubber 1955-1959 Chevy Task Force Master Cylinder Access Holes
By “Rotten” Rodney Bauman - Images by the Author
When a pickup project’s cab and chassis remain separated long enough, we might (OK, I might)...
A New Approach to Building an Old 1971 Chevy Truck
By Fuelish Media
You hear the term “back in the day” thrown around a lot, but for those who grew up in the pre-Internet era,...
Speedway Motors’ 1968 C10 Build Part 2: Chassis & Suspension
By Joe McCollough - Images by the Author
In the last installment of our Speedway Motors C10 build, we gathered up a derelict ’68 C10...
Latest Articles
Built to Remember: A Land-Speed-Inspired ‘32 Ford Roadster
Dale Grau’s ’32 Ford Lakes-Style Roadster Brings Back an Era
By Brian Brennan - Photography By NotStock Photography
If I may quote Pat Ganahl from his...
Everything You Need to Know About Gen-V LT Swaps
Swapping a new LT4 into a first-gen Camaro, with help from Detroit Speed.
By Barry Kluczyk - Photography by Brian Brennan
While LS swaps remain as...
Mint Mercury Monterey
A Timeless Classic Subtly Reimagined by John St. Germain
By Chuck Vranas - Photography By the Author
It takes a true craftsman with an eye focused...
MR’s Featured New Products For Your Hot Rod – 2024
Design Engineering’s Spray On Sound Deadening
The Advanced Thermal Acoustic Coating is a spray-on, roll-/brush-on, two-in-one sound and heat barrier for hot rod interiors that...
Period-Correct Custom Gauges & Taillights
Custom Metalwork Tastefully Modifies Our Ford Highboy Roadster
By Ron Covell - Photography By Jason Scudellari
Adding a small detail to a project car, such as...
Restomod Ford Ranch Wagon Cruiser
Vintage Styling With Supercharged Coyote Power
By Fuelish Media - Photography by the Author
Tim Bumgarner's lifelong passion for cars began in a family where he...
Coyote Swapped Ford Wagon
Schwartz Performance Built Six Speed & Supercharged 1948 Ford Woodie
By Brian Brennan - Photography By Matt Lankford
The Ford woodie, along with others, has a...
The Perfect Center Section For 8.8 Gears
The Best Of Both Worlds: Detroit Speed’s FN988 Hybrid Center Section
By Ron Ceridono
Even when Flatheads dominated in the early days of hot rodding, the...
1932 Ford Sedan Delivery, Part Car & Truck
Iconic Hot Rod and Award Winning Show Car
By Brian Brennan - Photography By Michael Christensen
In the world of early hot rods, the 1932 Ford...
Our digital and print versions offer tons of exclusive content not offered here.
Latest Content - Modern Rodding
Engine Oil Analysis Testing
By Jeff Smith - Images by the Author
It’s an exciting moment. You’ve just finished bolting that freshly built engine in your hot rod. The...
Charles Black’s 1954 Dodge Hot Rod C-Series
By Rob Fortier - Images by Josh Mishler
The year 1954 was a big one—it saw the advent of poodle skirts, Wiffle balls, and most...
Part 3: Building a One-of-a-Kind Model A Sedan
By Ron Covell - Photography By Chris Gray
The one-of-a-kind 1930 Model A sedan has undergone distinctive chassis touches as well as all sorts of...
Roadster Shop Model A Body Modifications
Part 2: 1930 Ford Model A With Impressive Modifications
By Ron Covell - Photography By Chris Gray
The last article examined the outstanding chassis Roadster Shop...
Parting Shot: The End Of The Chevy Malibu
From 1965 To 2024, The Chevy Malibu Legacy Ends
By Brian Brennan
I get that things change. It’s part of a normal day; from sunrise to...
Rodding Around: Triple Crown, Trip to Taiwan, Harold’s Hot Rods
Triple Crown Of Rodding Offers More, ITGM’s Trip To Taiwan, and Harold’s Hot Rod Relocation
By Brian Brennan
Triple Crown of Rodding Offers Lots More!
The Triple...
