By Scotty Lachenauer – Images by the Author
The Jersey Shore can be a magical place. It’s a locale where good times are had on a daily basis and memories are forged that can last a lifetime. For years, Eric Faggoli and his family have enjoyed their summers in the sprawling beach town of Avalon, a popular ocean-front destination on the southern coastline of the Garden State. Eric, along with brothers Tom and Kyle, reveled in their summer surf home and regularly partook in the good cheer and all the amenities that the Shore life has to offer.
When a well-used 1970 Chevy K5 Blazer found its way to the family Diesel Repair shop, their father, Dave, was excited to make it his own and add it to their family fleet. “Dad always liked models from that particular era, and the drop-top Chevy reminded him of his childhood,” Eric remembers. Of course, all the brothers were excited at the prospect of having an old-school Blazer to cruise the local towns in as well, ready to make it their local cruiser for the beach community.
Overall, the burly Chevy was in reasonably good shape for its age, but it needed some help. The Blazer would end up spending the next few months in their shop getting into safe “driveable” condition so the family could use it with peace of mind. Though the truck demanded a good amount of work, there was one major upside: “It was a freebie. My dad didn’t pay anything for it, which was obviously a big plus,” Eric continues.
Chevy Metal
The foursome put some effort into the Blazer, rebuilding the original 350ci small-block to get it back on the road. They also painted the truck a shade of light blue over the previous yellow it came with and cleaned up the interior. “With some work the Blazer soon became our daily driver and ‘beach toy’ at the Shore. We never had a top on it, so it was an ‘all-weather’ ride. We had a blast cruising it around all summer and loved blowing the doors off the smaller and underpowered golf carts that buzzed around our town. Dad loved its size and the fact that it towered over the neighbor’s carts,” Eric says. The Blazer turned out to be the perfect, carefree vehicle for those joyous summertime weekends and needed vacation time for the Faggoli crew.
However, things would sadly change for the family. “Three years ago, our father suddenly [died]. My brothers and I knew that we should rebuild the Blazer in honor of our father.” They were in agreement that this old Chevy deserved more than just a quick rebuild. After some searching, they contacted Mark Denlinger at MAD Customs in Boyertown, Pennsylvania. They discussed with Denlinger the possibilities of upgrading the Chevy into a classy beach cruiser. “We knew what we needed the Blazer to be. We wanted a factory-appearing ride with an era-correct look. We didn’t need the latest touch screens, modern chassis, or rollcages. However, we wanted modern mechanical features to make it much safer and usable for the whole family in the summer.” After talking with Denlinger, the brothers decided that MAD Customs were going to be the ones to handle the rebuild.
MAD Summer
Once in the shop, Denlinger and the crew got right on the build. “Eric had mentioned the Blazer once belonged to his dad, Dave, and was left to the brothers after he [died]. He wanted it upgraded without losing the overall feel of a vintage truck,” Denlinger states. Eric knew he wanted an LS to power the truck, along with an automatic transmission, so Denlinger chose a Chevrolet Performance package consisting of a 525hp LS3 for the motorvation, backed by a sturdy 6L80E trans for the shifting. The combo is part of the “Connect and Cruise” package, with the ECU and wiring harness included. “We have used this package in the past for its simplicity when the customer doesn’t mind a somewhat-OEM look to the engine compartment,” Denlinger states.
Before the new powerplant was installed, the crew smoothed the firewall and welded up all unneeded holes to clean up under the hood. After the engine was placed in its new crib, a Holley Performance Mid Mount Accessory Drive was added, along with a set of their retro LS valve covers to hide the coil packs for a smooth look. To keep this rad ride cool on those hot summer days, a Griffin crossflow aluminum radiator was installed and is fed by a pair of electric fans.
The chassis got a lot of love from the crew at MAD Customs. “For the suspension we wanted to go heavy duty. We chose a 1-ton, 14-bolt rear and a 1-ton Dana 60 front axle, both from East Coast Gear supply, and we ordered them complete with 4.56 gears,” Denlinger says. Next, Wilwood disc brakes were installed both front and rear and the calipers were powdercoated gloss black. For the Blazer’s lift, Denlinger went with a BDS kit, which included the premium leaf springs and Fox 2.0 remote-reservoir shocks. The transfer case is a heavy-duty NP205 from Transfer Case Solutions built with their twin stick cable-operated shifter. To help with getting in and exiting this lifted Chevy, MAD installed power side steps from AMP Research with a bracket kit from Hogan Built.
Originally, the plan was to just upgrade the mechanical aspects of the truck and not touch the bodywork and paint, which was in decent shape. However, midway through the project there was a change in heart. “Eric then decided to go all-in and have the paint- and bodywork redone. “Because of my shop being too busy at the time to jump right into the bodywork he chose to outsource that part of the project to Ernest Henry Auto Body in Shoemakersville, Pennsylvania,” Denlinger says. The Blazer ended up spending about a year there getting its new skin of metallic medium blue. Once they finished the bodywork, the Blazer was returned to MAD Customs.
Blazer of Glory
Once back, the project shifted gears. It was decided that the truck could use a whole new interior to match its fresh paint. The truck was once again sent out and the upholstery work was completed by Accurate Auto Tops and Upholstery in Edgmont, Pennsylvania. On its return, MAD Customs added an HDX gauge setup from Dakota Digital and a badass RetroSound M2 stereo, feeding a JL audio MX 500/1 subwoofer amp to the cockpit. Tunes are transmitted by Pioneer 6.5-inch speakers up front and 6-inch speakers out back along with a JL Audio 10-inch subwoofer. The rear speaker enclosures were handmade in-house and have cup holders for the backseat passengers. The steering wheel was also replaced with a Billet Specialties Classic 15-inch wheel. To keep the interior in primo condition, Denlinger sourced a new hardtop roof from Premier Street Rods out of Lake Havasu, Arizona. “It came already finished off in a white gelcoat. We then installed all the glass, weatherstripping, and hardware. Next, we fit the hardtop to the Blazer body to seal in the newly restored cockpit.”
Finishing touches include the wheel and tire combo. Eric decided on the classic polished Pro Comp Xtreme Alloys in size 18×9 at the corners. They are shod in rugged Toyo Open Country R/T Trail tires, 35×12.5-18 all around. American Autowire supplied the Classic Update kit that ties the truck together electrically. All the LED side marker lights and taillights are from United Pacific. The headlights are LED RetroBright from Holley, which give the truck a retro look with modern performance. One of the most important parts of a major build like this is the wheel/tire combo.
As the Blazer build came to an end, Denlinger could see that this project was a complete success on all accounts. “After the transformation, the truck drives more like a late-model truck than an old truck. The LS3 has so much more and is reliable and much more fuel efficient. It still looks similar to the way it was before, but it feels like a completely new vehicle now.” Eric summed it up with one thought: “I love this truck from the perspective of preserving great memories and I can’t wait for the years of use to come.”
Check out this story in our digital edition here.





































