Part 6 of The Speedway Motors 1968 C10 Build: The Finale
By Joe McCollough - Images by Jason Lubken & Jessica Coleman
Speedway Motors wraps up its six-part series covering the build of its 1968 Chevy...
Brent Mivelaz’s 1963 Ford Unibody F-100
By Fuelish Media
From a former emergency response vehicle to a preserved patina cruiser, Brent Mivelaz’s 1963 Ford Unibody bucks the Blue Oval loyalty with...
Talbert Goldman’s 1990 GMC Sierra OBS Custom
By Rob Fortier - Images by NotStock Photography
Since he was “knee high to a grasshopper”, Goldman has been a “hot rodder” … now, he’s...
Rick Clutter’s Premier Street Rods Built 1961 Ford Unibody Custom
By Fuelish Media
There’s a high road, a low road, and then there’s the Long Road, the latter of which Rick Clutter’s 1961 Ford F-100...
The John Lamb/Tin Man’s Garage Triton V10-Powered 1961 Ford Unibody
By Brian Limberg (Excerpts from his Build Book) - Images by NotStock Photography
John Lamb enlisted the help—and expertise—of Brian Limberg et al from Tin...
Mike Schott’s 1992 Chevy Silverado
By Tim King - Images by the Author
1988 welcomed a new era of the truck line, ending the famous Squarebody Chevrolet trucks that lasted...
Bob Ford’s 1957 Chevy Task Force-Series Truck Turns up the Heat
By Chuck Vranas - Images by the Author
Somewhere on the fringe you’ll find devout hot rodders still bringing vintage big-blocks linked to three pedals...
The Evolution of Pat Floyd’s 1969 Chevy C10
By Chuck Vranas - Images by the Author
The alluring 1969 Chevy C10 laid out across our pages owned by Pat Floyd of Chester, New...
Robert Colvin’s Twin States Rod Shop Built 1996 Chevy CK1500
By Rob Fortier - Images by NotStock Photography
Instead of waiting to find “just the right one” to start with, Robert Colvin decided to team...
Ruben Villamar’s 1968 Big-Window Utility
By Eric Geisert - Images by the Author
Ruben Villamar, who lives in Irvine, California, answers the question: If you owned a construction company, what...
Nick Riesett’s 1965 Chevy C10
By Scotty Lachenauer - Images by the Author
Nick Riesett, of Aberdeen, Maryland, wasn’t looking for a long-term project when he spied this ’65 C10...
THE SPEEDWAY MOTORS 1968 C10 Build: Rust Repair, Bodywork, and Paint
By Joe McCollough - Images by Jessica Coleman & Andy Chaves
If you’ve been following along with our ’68 C10 project, you’ve seen us checking...
Paul Messman’s BBT Fab–Built 1963 Chevy C10
By Rob Fortier - Images by NotStock Photography
I vaguely remember the first time I saw that title used in a feature way back in...
LEGACY SERIES: Fat Jack Robinson’s 1951 Ford F-1
By Johnny Rotten Robinson - Images by Tim Sutton
When I began my magazine career back in the early ’90s, one of the first shops...
Charles Black’s 1954 Dodge Hot Rod C-Series
By Rob Fortier - Images by Josh Mishler
The year 1954 was a big one—it saw the advent of poodle skirts, Wiffle balls, and most...
LS Powered Ford F100
By Scotty Lachenauer - Images by the Author
When Kyle Weichold bought his ’56 Ford F-100 he had a good mind to put modern Blue...
Shane Dutka’s Tire-Searing ’71 Ford F100 Sport Custom
By Chuck Vranas - Images by the Author
In a Chevy-heavy world of classic trucks packed with LS power and platform conversions, it’s a breath...
Matt de los Cobos’ 1972 Chevy Blazer, a Two-Door Family Funster
By Rob Fortier & the Owner - Images by Tim Sutton
I love a good story, especially from a fellow Chevy guy—and I really love...
Kerry “Duck” Cunningham’s 1959 Chevy Apache
By Rob Fortier - Images by NotStock Photography
In my lifetime, as a vehicle owner/operator (40 years now this month!), I’ve owned one “mini-truck;” it...
Walker Zeigler’s First-Gen 1965 Chevy C10
By Rob Fortier - Images by NotStock Photography
Up until 1960, General Motors had names for each series of trucks—Art Deco, Advance Design, Task Force—even...
A New Approach to Building an Old 1971 Chevy Truck
By Fuelish Media
You hear the term “back in the day” thrown around a lot, but for those who grew up in the pre-Internet era,...
Paul Close’s Y-Block Powered 1956 F100 is Layered with Custom Cool
By Chuck Vranas - Images by the Author
As the years pass, there’s always one ride that totally instills itself into your memory banks for...
Josh Bentley’s Vini’s Hot Rods 1983 Chevy Squarebody C10 With a Roadster Shop SPEC...
By Rob Fortier - Images by NotStock Photography
Back in 1983, Wendell Bentley, a mechanic at a local sawmill in Fredonia, Arizona, bought himself a...
Horton’s Hot Rod Shop’s Wicked Hemi-Powered 1969 Dodge D200 Parts Hauler
By Chuck Vranas - Photography by the Author
Through the decades there was only one place to get hop-up parts for your ride: at the...
Joe Smith’s 1953 Ford F100 packs an LS punch with a Classic Contemporary Vibe
By Chuck Vranas - Images by the Author
One of the easiest ways for truck enthusiasts to channel their passions while growing up was to...
1982 Chevy Squarebody C1500 Custom C10
By Fuelish Media
There’s nothing mild mannered about this ’82 Chevy pickup. Cory Shows, of Caledonia, Mississippi, works as a custom aircraft painter by trade,...
Korek Designs Built 1950 Ford F-1
By the CTP Staff - Images by NotStock Photography
Dennis Strobel has been a lifelong enthusiast of hot rod and custom vehicles. In 2009, on...
Troy Alston’s 1959 Chevy Apache
By Rob Fortier - Images by Jason Matthew
When asked how he got involved in the hobby, New Jersey’s Troy Alston simply replied, “I was...
LEGACY SERIES: The Dale Hollenbeck Chevy Stepside
By Darryl Hollenbeck - Images by Tim Sutton
CTP’s Legacy Series is devoted to preserving the history of the hobby, be it legends who paved...
FAMILY HERITAGE: Mike Steele’s 1968 Chevy C10
By the CTP Staff & Mike Steele - Images by NotStock Photography
Last year, we gave you a little behind-the-scenes insight on Mike Steele’s ’68...
Ralph Amezcua’s Fateful 1971 GMC Pickup Find
By Fuelish Media
For some folks, owning a customized vehicle of any sort can serve as the ultimate form of self-expression. Cultivating the overall aesthetic...
Jay Rusk Built this Head-Turning ’66 C10 out of a $600 Donor Truck
By Tommy Lee Byrd - Images by the Author
Before the days of intense aftermarket support, a truck build would often require some type of...
Connor Crews’ 1998 Chevy C1500
By Rob Fortier - Images by Jeff Hamm
“When someone asked me what my dream car or truck was, I wanted to be able to...
Pete Rappoccio’s ’54 Chevy 3100 Swag Custom Ride
By Scotty Lachenauer - Photography by the Author
Glenn Richards of Swag Custom Rides is a man on a mission. His New Britain, Connecticut, shop...
Brian Downard’s ’72 C10 Started as an Empty Cab and a Dream
By Tommy Lee Byrd - Photography by the Author
Motivation for a project can come from many places. Sometimes, it’s a natural desire to get...
The Collard ’79 Chevy C10
A True Multigeneration Family Affair!
By Rob Fortier - Photography by Grinder TV
Being a father myself, of course anytime we come upon a father-and-son project...
Jim Brown Builds a Big Block, Stick Shift ’68 Dodge Pickup
By Tommy Lee Byrd - Photography by the Author
There’s no question that the classic truck market is flooded with pickups that wear a Bowtie...
Randy Martin’s Legens-Built 1967 Ford F-100
By the CTP Staff - Photography by John Jackson
Randy Martin's love for the early F-100 trucks began when he first encountered a ’64 Ford...
Rod Parsons’ Beyond-Stunning, All-Carbon ’67 C10
By Rob Fortier - Photography by John Jackson
I’ve always admired the use of carbon fiber—from F1 racing to motorcycle accessories and even smartphone covers....
Greg Klima’s Homebuilt Coyote-Swapped ’54 F-100
By Scotty Lachenauer - Photography by the Author
Many true hot rodders state that “built” is better than “bought.” Adding one’s own touches to a...