Rodding Around New — Major Giveaways at the Triple Crown of Rodding

Giveaway Truck

This brand-new Chevrolet shortbed, Fleetside, two-wheel-drive pickup truck is destined to be a valuable collector’s piece. The artwork presented comes by way of Eric Brockmeyer and will be brought to life by Alloway’s Hot Rod Shop.

- Advertisement -

The truck features an Alumicraft one-off billet grille, Billet Specialties one-off 22-inch Bonneville wheels, plus the truck features a designer red accent body stripe applied at Alloway’s. The pickup rides on speed-rated Toyo rubber featuring a thin “Redline” added by Diamond Back. And, of course, the ultimate hot rod slammed profile that is a signature design element of all Alloway hot rods will be present in this Chevy pickup.

All registrants are entered for a chance to “win” this truck valued at $70,000-plus. It will be given away by a luck-of-the-draw held during the awards ceremony (Saturday, September 7, 2024) during the Triple Crown of Rodding event. The eventual winner must be present to win; good luck to all registered participants.

02 rodding around triple crown of rodding giveaway LS blue print engines 03 rodding around triple crown of rodding giveaway LS blue print engines

- Advertisement -

Giveaway LS Engine

Look for BluePrint Engines to be highly visible at this year’s Triple Crown of Rodding with its giveaway BluePrint LS engine (ProSeries, PSLS3760EFI, valued at $10,000). It will be given away by luck-of-the-draw during the awards ceremony immediately after the winning Triple Crown of Rodding cars and trucks are announced. Also, should you win the BluePrint LS, don’t worry, your ticket will be placed back into the drum and it will still be possible to win the ultimate prize: the new Chevrolet truck modified by Alloway’s Hot Rod Shop. All registered participants are automatically entered to win both the engine and truck drawings. Winners will need to show their vehicle registration number and a valid driver’s license for identification.

The BluePrint LS is a 376ci ProSeries EFI engine that produces 549 hp and 469 lb-ft of torque, all on 91-octane. The LS is based on a new 6.2L LS aluminum block (machined in the U.S., has six-bolt mains and a one-piece rear main seal). Next up are the BluePrint LS3 aluminum heads (PS8015). Also used is a roller cam with a 0.612-inch intake and a 0.585-inch exhaust lift yielding a compression ratio of 10.7:1 plus hypereutectic pistons, forged 6.125-inch rods, and a nodular iron crank with a stroke of 3.622 inches.

It is equipped with an 87mm LT4 DBW throttle body, a fabricated intake manifold, injectors and fuel rail kit, coil packs, spark plugs, a water pump, a harmonic balancer, and all sensors required for the engine to run.

- Advertisement -

Related Articles

Search Our Site

More Modern Rodding

Supercharger & Suspension On Myers’ Fenderless Ford Roadster

Part 4: Ford Y-Block, McCulloch Supercharger, and Suspension By Ron...

2024 O’Reilly Auto Parts Sacramento Autorama

Another Leg of the West Coast Challenge Car Show...

Rodding Around – SEMA Show Accolades & Hellephant Powered ‘69 Charger

TUSK: Hellephant Engine Swapped 1969 Dodge Charger Ringbrothers...

How To Restore Trim Pieces On Your Classic Car

DIY Trim Piece Restoration For Your Project Car By Tommy...

The Last Of The Road Tours Ends At The Triple Crown of Rodding

By Jerry Dixey While we think of the Triple Crown...

Parting Shot: Neal East’s Famous Ford Panel Truck

Lifelong Hot Rodder J. Neal East’s Story Continues By Brian...
More Modern Rodding

A New Suspension on Jason Scudellari’s Brookville Model A

By Ron Ceridono   -   Photography By Jason Scudellari Over the...

Classic East Coast Styled 1934 Channeled Ford Coupe Personifies Kool

By Chuck Vranas   -   Photography by the Author With regard...

1955 Thunderbird With Shocking Looks & Performance

Coral Orange Ragtop Ford Thunderbird By Brian Brennan   -   Photography...

Dual Master Cylinder Conversion For Your Classic Car

Improving Braking Performance on a 1963 Impala With Classic...

LT4 Powered Tri-Five Chevy

Tri-Five Chevy With Modern Power Plant and Independent Rear...

How To Rebuild An 8 3/4 Chrysler Rearend

DIY Guide To Rebuilding A Rearend At Home By Barry...