Retro LS – Turning a Chevy LS into a Vintage Look Small Block

By Scotty Lachenauer – Images by the Author

There’s no doubt that Chevy’s LS engines are an excellent powerplant for any classic ride that you want to be able to hop in and drive without worrying about what’s going down under the hood. These modern mills can deliver care-free performance right out of the box, giving you the utmost confidence to drive your car, and lean on it hard, anywhere at any given time. Though we try and try again, we sometimes just don’t have that same conviction with some older, OEM engines … especially ones that haven’t been maintained properly or given enough attention over the years.      

Though LS engines can be more dependable, to some, they lack that aura and classic vibe offered from the engines of the ’60s and ’70s. There’s nothing more aesthetically appealing than a fresh period-correct engine sittin’ pretty in its corresponding engine bay.

Overhead layout of a Chevy Orange single-plane LS3 EFI intake manifold, four-barrel throttle body, and black classic air cleaner.
Some parts get the appropriate black shade and finish.

Fortunately, there are aftermarket companies that have developed parts and add-on kits that can be easily retrofitted to your LS engine to make it more appealing to the eye, especially to those classic car lovers out there.

At MAD Customs in Boyertown, Pennsylvania, proprietor Mark Denlinger and his Chevy-loving cohorts have transformed enough of these crate engines to turn the process into an art form. Using off-the-shelf aftermarket parts, clever detailing, and a few custom touches, they turn modern Chevy powerplants into vintage-looking mills that look right at home in a classic engine bay.

Front three-quarter view of a completed Chevy Orange LS3 V8 engine dressed with vintage Chevrolet script valve covers, Holley Mid-Mount accessory drive, and black snorkel air cleaner on an engine stand.
This LS is a great powerplant for almost any ride, but it really shines in a period-correct Chevy.

Follow along to see how the guys tackle this feisty LS3 and turn it into a mill that would work in any classic ride, knowing that its modern capabilities will take a load off the brain when doing some long-distance runs, cold weather exploring, or even some hot laps on the track.

Check out this story in our digital edition here.

Brand-new bare aluminum Chevrolet Performance LS3 crate engine resting on a wooden shipping pallet prior to disassembly.
Here’s our starting point. A fresh GM crate LS3 unwrapped and ready for a new life as a modern-built, vintage-appearing powerplant, born with all the upsides of today’s advanced engine-building capabilities.

 

Technician using a cordless impact driver to remove the oil pan from an upside-down LS3 V8 on an engine stand.
MAD Custom’s technician Mark Alexander removes the stock oil pan to replace it with a Holley pan for better ground clearance. You can see here the LS has been stripped, prepped, and taped off for paint. All machined parts are blasted with aluminum oxide so the paint has something to grab onto.

 

Painter applying glossy Chevy Orange engine enamel with an HVLP spray gun to an aluminum LS3 V8 block and cylinder heads.
Painting the engine is a tedious task. Once epoxy primed, MAD Customs owner Mark Denlinger sprays the block in single-stage Chevy Orange urethane to match the classic vibe of the engine build. It’s important to not use more paint than necessary because of the heat generated by the engine.

 

Overhead view of a freshly painted Chevy Orange LS3 V8 long-block with masked intake ports and lifter valley on an engine stand.
Here we see the finished engine, ready for its next step in the process. Note that the original valve covers were kept on during painting. They will be discarded later in the build process.

 

Close-up of a pinstriper hand-painting black lettering onto the raised Chevrolet script of a Chevy Orange LS valve cover.
Once finished in-house, the new valve covers are sprayed in the same Chevy Orange paint, then hand-lettered in gloss black by MAD Customs technician Brandon Wuchter.

 

Flat-lay of Chevy Orange water pump, script valve covers, valley cover with oil fill tube, ARP bolts, and Taylor plug wires.
Here’s our layout of parts for the build. As you can see, items such as the Holley water pump housing, valley cover, and the Holley intake are all sprayed in matching Chevy orange.

 

Builder installing a Chevy Orange billet valley cover featuring an integrated vintage-style front oil filler neck onto an LS3 block.
Next, the Billet Specialties retro-styled valley cover with oil fill tube that was previously painted is added to the block. This will prevent dirt and debris from getting into critical areas of the engine.

 

Macro shot of hands pressing rubber O-ring gaskets into the machined rectangular ports of a painted LS3 EFI intake manifold.
O-ring seals are added to the prepped Holley single-plane EFI intake in preparation of installation.

 

Engine builder setting a Chevy Orange painted Holley single-plane EFI intake manifold onto an LS3 V8 long-block.
Technician Alexander installs the modern Holley intake on the LS, assuring its correct fit. This is the base for the LS engine’s fuel induction setup.

 

Technician using a digital torque wrench to tighten intake manifold bolts on a Chevy Orange LS3 V8 engine.
The intake is torqued down to the correct specs to ensure proper installation.

 

Close-up of hands pressing electronic fuel injectors with blue O-rings into a Chevy Orange Holley single-plane intake.
After the intake is installed, GM injectors are fitted to the intake. Each injector is rated at 42 lb/hr—more than sufficient for this LS3 setup.

 

Builder installing black anodized Holley EFI billet fuel rails over the injectors on a Chevy Orange LS3 V8.
The Holley-supplied fuel rails are up next and set up on the injectors. MAD Customs keeps the color scheme here all orange and black for that vintage look.

 

Close-up of technician positioning a four-barrel-style throttle body atop a Chevy Orange single-plane LS3 intake manifold.
To feed this modern engine, a 1,000-cfm Holley throttle body is added up top.

 

Engine builder placing a vintage-style black single-snorkel air cleaner onto the four-barrel throttle body of a painted LS3.
To give it that total vintage vibe, MAD Customs decided on a Goodmark C10 reproduction four-barrel air cleaner to top the throttle body. This is an all-around great choice when trying to evoke that ’60s vibe.

 

Macro shot of the aluminum roller rocker arms and valve springs on a Chevy Orange painted LS3 cylinder head
The factory valve covers are now removed in preparation of better things to come. Being a brand-new mill, this thing is spotless inside, and the mounting sills are cleaned and readied for the next step.

 

Technician bolting a machined aluminum inner valve cover base onto an LS3 cylinder head to conceal ignition coils.
Here the Billet Specialties valve cover adapter is fastened into place. This will accept the retro-styled valve cover and hide the coils out of sight and out of mind.

 

Close-up of ignition coils being mounted inside a billet aluminum two-piece valve cover base on a Chevy Orange LS3.
The new ACDelco ignition coils are added to the adapter plate and tied together with Holley-supplied coil harnesses.

 

Builder fastening a Chevy Orange vintage Chevrolet script outer valve cover over the hidden ignition coils on an LS3 V8.
These AMD reproduction valve covers look right at home now that they’ve been painted and the small Chevrolet script has been hand lettered. Hiding the coils underneath is a big improvement to the engine’s overall appearance.

 

Mechanic using a ratchet to install the black harmonic damper pulley on the crankshaft snout of a Chevy Orange LS3 V8.
The supplied harmonic balancer assembly is installed next. This is the basis for the front accessories. Mounting the piece involves using a specialized installation tool that presses the balancer onto the crank without damaging the threads.

 

Builder bolting a Chevy Orange painted Holley Mid-Mount accessory bracket and water pump housing onto an LS3 engine.
Up front, a Holley Mid-Mount Accessory Drive system is installed on the LS. The water pump housing is an integral part of the engine build as it’s designed to serve as a mounting point for several of the important parts of the engine makeover. It features a bracket-less design, which cleans up the overall look of the engine and makes installation of key parts a snap.

 

Close-up of hands fastening a black water pump pulley onto the Chevy Orange accessory drive housing of an LS3 V8
Next up is the water pump assembly that is included in the kit. With this design, the water pump is easily serviceable. Here, Alexander adds the assembly to the water pump housing. Antiseize or Loctite is added to all stainless steel bolts.

 

Technician mounting a black Holley alternator into the Chevy Orange accessory drive bracket on the driver side of an LS3.
The Holley alternator is added next directly to the water pump housing, keeping with the color combination. It’s an LT1-based, 150-amp premium unit, and, like many of the accessories, was included in the Holley kit.

 

Front driver-side view of the black alternator, power steering pump reservoir, and pulleys mounted on a Chevy Orange LS3.
The included Type II baffled power steering unit is installed, and like before, it attaches directly to the housing. Here we see our accessory setup coming together.

 

Builder installing a black air conditioning compressor onto the passenger side of a Chevy Orange Holley accessory bracket.
Last piece of the puzzle is the Holley-supplied Sanden SD7 compact A/C compressor, which handle the cool side of the HVAC system for our LS build.

 

Macro shot of technician fastening a black Lokar flexible dipstick bracket beneath the Chevrolet script valve cover on an LS3.
This Lokar flexible engine oil dipstick is the prefect modern add-on to our build. The design gives you several options on where to locate your dipstick according to your build.

 

Engine builder releasing tensioner tension while routing the serpentine belt across the black pulleys of a Chevy Orange LS3.
The serpentine belt is next on the list and is included with the Holley accessory drive kit. Alexander adjusts the tensioner to get the belt to fit properly.

 

Technician tightening the front fuel crossover hose fitting between the black Holley EFI fuel rails on a vintage-styled LS3.
MAD Customs went ahead and fabricated their own custom fuel crossover hose to connect the rails and ensure proper fuel supply between banks.

 

ITGM Source Box Heading

ARP Web Sources

AMD web source

billet web source

lokar Web Sources

MAD Customs web source

Related Articles

Search Our Site