1964 Chevy High School Hauler, Part 1: The Beginning

By Rob Fortier & Carson Reed   –   Images by Carson Reed

Over the last three-plus decades I’ve met some amazing builders—many of whom have become close friends. One such individual is Ryan Reed (Reed’s Ride Designs), who I originally crossed paths with when I was thrown head-first into the world of Fat Jack Robinson back in the ’90s. Since then, we’ve both grown into fine, upstanding adults(!) and both have managed to raise equally admirable sons. Ryan’s boy, Carson, now a freshman in high school, is quickly following in his father’s footsteps—learning the ins and outs of building hot rods the right way: with as much attention to detail as humanly possible combined with top-notch craftsmanship. His first hands-on project, fittingly enough, is his own set of wheels … his very first set he’ll be driving to school once he obtains his learner’s permit (and Pop’s permission!).

- Advertisement -

02 Beige 1964 Chevy C10 parked on a quiet road during sunset

“High School Hauler,” as we’ve appropriately dubbed the project (and ironically enough, a moniker given to Ryan’s ’67 Bug he built and drove when he was a teen back in school!), is Carson’s ’64 C10 that he’s currently spending many a night after school as well as weekends wrenching, cutting, and welding on. When I first learned of the father-and-son project, I wanted to involve CTP for obvious reasons—but there would be stipulations! One, Carson would have homework (he would be responsible for documenting the entire build for us); two, I get the second ride in the ’64 when it’s done! So, without further ado, let’s kick this series off with the young man himself!

03 Side view of beige 1964 Chevy C10 parked outdoors on a sunny day

- Advertisement -

“My name is Carson Reed. I am 15 years old and live in Corona, California. Since I was a young child, I have been around the hot rod community and have gone to most of the car shows in the Southern California area. It was natural for me to be drawn to cars because I have been working on projects, such as my bikes, scooters, and skateboards with my dad from a very young age. Working on stuff like that progressed into working with my dad on cars. From working with my dad I started to have a liking for the characteristics of hot rods. By the time I got old enough to start my own project I knew that my first truck would have to be like this.

04 Beige 1964 Chevy C10 parked in a driveway next to a garage

More reading: How to make a 1963-1972 C10 longbed frame into a shortbed

“This project came to be because one of my dad’s friends, Brian Williams, was buying the truck for himself and soon decided that it would be a good first truck for me. So, he had it shipped to my dad and told him to give it to me. On my 9th birthday I was given the keys to the truck with certain guidelines. They told me that I would have to work in order to make the money it would take to build the truck. So, this started the process of me working on a regular basis.

- Advertisement -

05 Suspension components laid out on a mat for a 1964 Chevy C10

“My dad and I are planning for my truck to sit just right … just like every car he builds. We wanted to raise the bed floor as little as possible to still achieve a low ride height and retain a functional bed. We intend to leave all the paint stock and the spots where we do work on the body will be painted to match.

06 Assorted metal parts and tools for 1964 Chevy C10 on a garage floor

“I anticipate learning how to weld better and learn more about chassis fabrication while working on the front and rear suspension. I also want to get better at building things from scratch because once I’m good at that it will carry on throughout my life. I will be able to fix anything I need and make anything I want after this truck. I hope to know how to do sheetmetal work exceptionally well, after I’m done with all of the work on the truck. The ultimate goal with the truck is for me to learn the process of putting mechanical things together, improve on my fabrication skills, and to have a good and reliable truck for me to drive daily to high school. I would also like to go to some of the truck events with it.”

07 Young man standing in the bed of a partially restored 1964 Chevy C10

FAMILY HERITAGE: Mike Steele’s 1968 Chevy C10

Some of the areas we’ll be covering—I’m sorry, that Carson will be covering—as the year progresses are: the abovementioned bed shortening (in-between short and long wheelbase with some pretty trick methods of raising the Brothers’ bed floor and integrating their wheeltubs, not to mention the “unconventional” box shortening), installing a Scott’s Hotrods ’N Customs IFS (as low as possible, as Mr. Reed is not a believer in airbags) with Aldan coilovers and Wilwood brakes, facilitating a Silver Sport TREMEC five-speed kit with the 383 small-block patiently waiting in the corner, and upgrading the factory gauges with Classic Instruments’ new ’64-66 Truck Package. Hope you all are even remotely as eager as I am to see this build progress!

08 Rear bed of a 1964 Chevy C10 lifted with a hoist during restoration 09 Disassembled bed of a 1964 Chevy C10 on jack stands in a driveway 010 Man working on the disassembled bed of a 1964 Chevy C10 in a driveway 011 Young man grinding metal on the bed of a 1964 Chevy C10 creating sparks 012 Man using a sander on a part of the 1964 Chevy C10 in a workshop 013 Man operating a metal shear machine for fabricating parts for a 1964 Chevy C10 014 Rear view of the disassembled bed of a 1964 Chevy C10 showing the frame and axle 015 Man welding a part for the 1964 Chevy C10 bed in a workshop 016 Close up of the bed corner of a 1964 Chevy C10 showing metal fabrication work 017 Close up of the wheel well in the bed of a 1964 Chevy C10 with wood planks installed 018 Close up of the newly installed wooden bed in a 1964 Chevy C10 019 Rear view of the 1964 Chevy C10 bed showing the wood and metal construction 020 Interior view of a 1964 Chevy C10 with a vintage steering wheel and dashboard 021 Young man holding a new gauge cluster for a 1964 Chevy C10 in a workshop 022 Partially disassembled 1964 Chevy C10 parked in a driveway

 

SOURCES

Reed’s Ride Designs
reedsridedesigns.com

Scott’s Hotrods ’N Customs
(800) 273-5195
scottshotrods.com

Click on this issue’s cover to see the enhanced digital version of 1964 Chevy High School Hauler, Part 1: The Beginning .

ctp june 2024

- Advertisement -

Related Articles

Search Our Site

More Classic Truck Performance

Steele Rubber 1955-1959 Chevy Task Force Master Cylinder Access Holes

By “Rotten” Rodney Bauman   -   Images by the Author When...

A New Approach to Building an Old 1971 Chevy Truck

By Fuelish Media You hear the term “back in the...

Speedway Motors’ 1968 C10 Build Part 2: Chassis & Suspension

By Joe McCollough   -   Images by the Author In the...

Paul Close’s Y-Block Powered 1956 F100 is Layered with Custom Cool

By Chuck Vranas   -   Images by the Author As the...

Old Anvil Speed Shop Increases Our 1948 Chevy’s Voltage With XS Power

By Rob Fortier   -   Photography by Taylor Kempkes For as...

Josh Bentley’s Vini’s Hot Rods 1983 Chevy Squarebody C10 With a Roadster Shop SPEC Chassis

By Rob Fortier   -   Images by NotStock Photography Back in...
More Classic Truck Performance

Rick’s Tanks Builds Our ’64 Chevy C10 a Custom Fuel Tank

By Todd Ryden “Out in the West Texas town of...

Brian Downard’s ’72 C10 Started as an Empty Cab and a Dream

By Tommy Lee Byrd   -   Photography by the Author Motivation...

Smoky Mountain Nationals

A Growing Gathering of ’47-55 Chevy and GMC Trucks By...

The Collard ’79 Chevy C10

A True Multigeneration Family Affair! By Rob Fortier   -   Photography...

Classic Performance Products Brake Update for OBS Chevys

By Ron Ceridono   -   Photography By Taylor Kempkes In the...

Jim Brown Builds a Big Block, Stick Shift ’68 Dodge Pickup

By Tommy Lee Byrd   -   Photography by the Author There’s...