1957 Ford Ranchero Bumper Fabrication
By Brian Brennan - Photography By NotStock Photography & Tin Man’s Garage
Artwork: Jimmy Smith Concepts
We kicked off our build series on the 1957 Ford...
7.3 Godzilla Power: Holley Intake, BTR Cam & Ultimate Headers
By Evan J. Smith - Photography By The Author & Courtesy of Holley Performance
Ford’s 7.3 Godzilla V-8 gas engine is a prime candidate for...
Plumbing Pointers: All About High-Tech Hoses
By Ron Ceridono - Photography By Brian Brennan
It may be hard to believe but, back in the day, the coolest way to improve the...
Two of Hot Rodding’s Favorite Engines: Hemi and 409
By Ron Ceridono - Photography by the Author & Chuck Vranas
Visit any hot rod event and you’ll find yourself surrounded by cars powered by...
Redesigning a 57 Ranchero Interior with Tin Man’s Garage | Part 1
By Brian Brennan - Photography By NotStock Photography
Illustrations By Jimmy Smith Concepts
The fullsized Ford Ranchero was originally built in 1957 and continued through 1959. It...
C3 Corvette Headlight Conversion – Going Electric
By Barry Kluczyk - Photography By Brian Brennan
Time to perform the electric headlight door conversion. We are moving from vacuum headlight doors to electric...
Audio Shoppe Tunes Up a 32 Ford
By Ron Ceridono - Photography By Brian Brennan
Since its inception, hot rodding has been about performance. We modify our cars for various reasons, installing...
Nuts and Bolts of Fastener Facts from the Experts at ARP
By Ron Ceridono - Photos by Brian Brennan, Ron Ceridono & Courtesy of ARP
For those who have been playing with hot rods as long...
Project 1970 Chevelle Exhaust Wrap-Up
By Ron Covell - Photography courtesy of Roadster Shop
In previous articles, we’ve covered many details of this exceptional 1970 Chevelle built by Roadster Shop....
A Silver Sport Tremec TKX For Our 1965 Mustang Fastback
By Evan J. Smith - Photography By Ryan Foss - Videography By Ryan Foss Productions
Embed with video: https://www.youtube.com/watch?v=SobQAIO3YmY
Hot rod engine swaps are nothing...
CPP 1965 Mustang Disc Brake Plumbing
By Ron Ceridono - Photography By Tate Radford
Colin and Sue Radford have been around performance cars since they were old enough to drive. From...
Godzilla Swap – Retrofitting a 7.3 engine into a 1965 Mustang
By Evan J. Smith - Photography By Ryan Foss & Brian Brennan
Videography By Ryan Foss Productions
Remember the fuel-injected 5.0L Fox-body Mustang days from 1986-93?...
Vintage Air’s Front Runner Accessory Drive System
By Ron Ceridono - Photography by Brian Brennan
The saying "Build a better mousetrap, and the world will beat a path to your door” is...
1971 Duster Interior Gets a Makeover
By Ron Covell - Photography By BBT Fabrications
We previously reviewed several stages of fabrication on this outstanding 1971 Duster being built at BBT Fabrications....
Corvette IRS – Our 1971 Gets Linked Up – Detroit Speed DECALink IRS
By Barry Kluczyk - Photography by Brian Brennan
We’re back in Phoenix at Hot Rods by Dean for the next part of our C3 Corvette...
Corvette Fuel Injection History — and the Aftermarket Options
By Barry Kluczyk - Photography By The Author
Corvette fuel injection has been around for decades. Dating back to 1957, its history is quite interesting...
Fabricating a Sheet Metal Core Support Cover
By Ron Ceridono - Photography By Chadly Johnson
A core support cover delivers more than just style. There is a functional benefit, as well. Just...
CPP Disc Brakes – Modern Stopping Power for a Vintage Mustang
By Ron Ceridono - Photography By Tate Radford
For most hot rodders, nothing compares to the thrill of being pushed back into the seat by...
Ironworks Speed & Kustom’s 1965 Chevelle Wagon – LT4 – Speedtech Chassis
By Gerry Burger
The station wagon, once relegated to chores related to family life, was the body style of choice for soccer moms, Little League...
7.3 Godzilla V8 Fitted in a 1965 Ford Mustang
By Evan J. Smith - Photography By The Author & Brian Brennan - Illustrations Courtesy of Roadster Shop
When it comes to the 7.3 Godzilla,...
1965 Ford Mustang Receives JEGS Rear Suspension Part 2
By Ron Ceridono - Photography by Tate Radford
Since the beginning of hot rodding (or roughly the same length of time Brennan has been involved),...
Project 1965 Mustang Fastback Gets a JEGS fabricated 9-inch Housing, Part 1
By Ron Ceridono - Photography by Tate Radford
When Colin and Sue Radford chose an early Ford Mustang fastback for their next project, they were...
Making Custom Taillights – Lenses and All
By Curt Iseli - Photography By Cody Walls
Custom taillights are a relatively simple modification that can make a significant visual impact—regardless of the model,...
Project 1971 Corvette is Outfitted with Detroit Speed SpeedRay IFS
By Barry Kluczyk - Photography By Brian Brennan
Let’s be honest, vintage Corvettes look much better than they drive. The C2 (1963-67) and C3 (1968-82)...
1932 Ford Highboy Roadster has Coming Out 27 Years Later
By Kev Elliott
Photography By The Author, Pete Chapouris III, Tony Thacker & the Veazie Bros.
Illustration By Eric Brockmeyer
Twenty-seven years, that's how long this roadster...
1971 Duster Receives Fresh Sheetmetal
By Ron Covell - Photography By BBT Fabrications
BBT Fabrications has built quite a reputation for creating over-the-top performance car projects. For this project, they...
OptiFlow is Eastwood’s New Roll On Primer
By John Gilbert - Photography By The Author
Some projects are more exciting than others. One such tedious project is bodywork leading to primer. While...
Bolt-On Fadeaway Fenders for Traditional Customs
By Curt Iseli - Photography By Cody Walls
There are a handful of customizing tenets that define the early, traditional custom style. The first and...
JEGS Calvert Racing CalTracs for Drag Cars
By Ron Ceridono - Photography By Brian Brennan
Dean Livermore and the crew at Hot Rods By Dean (HRBD) have built some of the most...
1970 Chevelle Cleaning up Under the Hood
By Ron Covell - Photography By Chris Gray & Elia Daoud
When building a car, decisions are made at every step of the process that...
Easy to Install Electrical Accessories on Your Hot Rod
By Ron Ceridono - Photography Courtesy of the Manufacturers
We confess, we will always love bare bones, wind-in-your-face, traditional hot rods—we’re even partial to those...
POR-15 Keeps Rust at Bay
By John Gilbert - Photography By the Author
Rust never sleeps, that is, until rusted iron or steel is painted with POR-15 rust-preventive coating. I...
Custom Plumbing and Exhaust Systems
By Ron Covell - Photography By Jay Doerfler
We are continuing our investigation of the inspiring work being done on the 1969 Camaro project being...
Carry Metalflake in Waterborne Clear
By John Gilbert - Photography by Tom Koppinger & Doug Jerger
The range of colors for custom car paint expanded in 1960 with the introduction...
1967 Pontiac Firebird Sits on a Roadster Shop Chassis
By Ron Ceridono - Photography By Chadly Johnson
When two heavy hitters in modern hot rodding combine forces to modify an iconic car, there’s no...
Replacing the Roof of a 1965 Mustang Fastback
By Ron Ceridono - Photography by Tate Radford
We’ve been following along as Colin and Tate Radford of Radford Auto Body resurrect a 1965 Mustang...
1964 GTO Gets Flaming River Tilt Column
By Ryan Manson - Photography By the Author
Upgrading a classic muscle car isn’t unfamiliar territory to those who follow what we do here at...
How the AMBR 1936 Ford Roadster Top was Made
By Ron Covell - Photography By Brian Brennan & Adam Banks
We have covered the construction of Ross Myers’ fenderless 1936 roadster, built at Rad...
All About the Edelbrock VRS-4150 Four Barrel Carb
By Ryan Manson - Photography & Videography By Ryan Foss Productions
While the popularity of EFI has grown exponentially in recent years as kits became...
1969 Camaro Before The Paint
By Chuck Vranas - Photography By The Author
While on the road recently for Modern Rodding, our journey took us to ABS Classic Muscle Car...


























































