Tech - MR

Side concept illustration of a custom 1957 Ford Ranchero by Tin Man's Garage with callouts detailing chopped trim, custom bumpers, and wedge-sectioned body.

1957 Ford Ranchero Bumper Fabrication

By Brian Brennan - Photography By NotStock Photography & Tin Man’s Garage Artwork: Jimmy Smith Concepts We kicked off our build series on the 1957 Ford...
Front three-quarter angle of a Ford 7.3L Godzilla V8 test engine equipped with a cast aluminum Holley intake manifold and dyno exhaust headers on the test stand.

7.3 Godzilla Power: Holley Intake, BTR Cam & Ultimate Headers

By Evan J. Smith - Photography By The Author & Courtesy of Holley Performance Ford’s 7.3 Godzilla V-8 gas engine is a prime candidate for...
Clean routing of four black braided Pure Stealth hoses secured with billet chassis clamps along the gloss black inner fender and firewall.

Plumbing Pointers: All About High-Tech Hoses

By Ron Ceridono - Photography By Brian Brennan It may be hard to believe but, back in the day, the coolest way to improve the...
Pair of hot rods with Hemi and 409 engines.

Two of Hot Rodding’s Favorite Engines: Hemi and 409

By Ron Ceridono - Photography by the Author & Chuck Vranas Visit any hot rod event and you’ll find yourself surrounded by cars powered by...
1957 Ford Ranchero custom gauge cluster restored blue dash chrome trim vintage style interior

Redesigning a 57 Ranchero Interior with Tin Man’s Garage | Part 1

By Brian Brennan - Photography By NotStock Photography Illustrations By Jimmy Smith Concepts The fullsized Ford Ranchero was originally built in 1957 and continued through 1959. It...
Mechanic adjusting and installing the pop-up headlight housing on a white C3 Chevrolet Corvette during a front-end restoration.

C3 Corvette Headlight Conversion – Going Electric

By Barry Kluczyk - Photography By Brian Brennan Time to perform the electric headlight door conversion. We are moving from vacuum headlight doors to electric...
yellow hot rod inside stereo shop system installation

Audio Shoppe Tunes Up a 32 Ford

By Ron Ceridono - Photography By Brian Brennan Since its inception, hot rodding has been about performance. We modify our cars for various reasons, installing...
engine builder tightening arp fasteners on small block chevy engine

Nuts and Bolts of Fastener Facts from the Experts at ARP

By Ron Ceridono - Photos by Brian Brennan, Ron Ceridono & Courtesy of ARP For those who have been playing with hot rods as long...
1970 Chevelle with one-off exhaust tailpipes

Project 1970 Chevelle Exhaust Wrap-Up

By Ron Covell - Photography courtesy of Roadster Shop In previous articles, we’ve covered many details of this exceptional 1970 Chevelle built by Roadster Shop....
Ford Mustang Tremec TKX

A Silver Sport Tremec TKX For Our 1965 Mustang Fastback

By Evan J. Smith - Photography By Ryan Foss - Videography By Ryan Foss Productions Embed with video: https://www.youtube.com/watch?v=SobQAIO3YmY Hot rod engine swaps are nothing...
brake line cutting tool with steel line

CPP 1965 Mustang Disc Brake Plumbing

By Ron Ceridono - Photography By Tate Radford Colin and Sue Radford have been around performance cars since they were old enough to drive. From...
holley godzilla swap parts installed

Godzilla Swap – Retrofitting a 7.3 engine into a 1965 Mustang

By Evan J. Smith - Photography By Ryan Foss & Brian Brennan Videography By Ryan Foss Productions Remember the fuel-injected 5.0L Fox-body Mustang days from 1986-93?...
vintage air front runner installed in c3 corvette

Vintage Air’s Front Runner Accessory Drive System

By Ron Ceridono - Photography by Brian Brennan The saying "Build a better mousetrap, and the world will beat a path to your door” is...
30 1971 plymouth duster completed dash gauges console installed blue interior

1971 Duster Interior Gets a Makeover

By Ron Covell - Photography By BBT Fabrications We previously reviewed several stages of fabrication on this outstanding 1971 Duster being built at BBT Fabrications....
30 1971 corvette detroit speed IRS a

Corvette IRS – Our 1971 Gets Linked Up – Detroit Speed DECALink IRS

By Barry Kluczyk - Photography by Brian Brennan  We’re back in Phoenix at Hot Rods by Dean for the next part of our C3 Corvette...
01 1957 corvette 283 rochester fuel injection cutaway engine illustration

Corvette Fuel Injection History — and the Aftermarket Options

By Barry Kluczyk   -   Photography By The Author Corvette fuel injection has been around for decades. Dating back to 1957, its history is quite interesting...
01 1967 chevy nova grille and core support bare metal mockup

Fabricating a Sheet Metal Core Support Cover

By Ron Ceridono   -   Photography By Chadly Johnson A core support cover delivers more than just style.  There is a functional benefit, as well. Just...
01 1965 mustang cpp brake install red caliper slotted rotor mockup on spindle

CPP Disc Brakes – Modern Stopping Power for a Vintage Mustang

By Ron Ceridono   -   Photography By Tate Radford For most hot rodders, nothing compares to the thrill of being pushed back into the seat by...
01 1965 chevelle wagon disassembly stage shop lift missing front clip custom wheels

Ironworks Speed & Kustom’s 1965 Chevelle Wagon – LT4 – Speedtech Chassis

By Gerry Burger The station wagon, once relegated to chores related to family life, was the body style of choice for soccer moms, Little League...
01 1956 Mustang Godzilla engine install shop Tremec transmission crate setup SST cart

7.3 Godzilla V8 Fitted in a 1965 Ford Mustang

By Evan J. Smith   -   Photography By The Author & Brian Brennan   -   Illustrations Courtesy of Roadster Shop When it comes to the 7.3 Godzilla,...
01 rear suspension

1965 Ford Mustang Receives JEGS Rear Suspension Part 2

By Ron Ceridono   -   Photography by Tate Radford Since the beginning of hot rodding (or roughly the same length of time Brennan has been involved),...
01 jegs rhodes race cars 9 inch rearend radford auto

Project 1965 Mustang Fastback Gets a JEGS fabricated 9-inch Housing, Part 1

By Ron Ceridono   -   Photography by Tate Radford When Colin and Sue Radford chose an early Ford Mustang fastback for their next project, they were...
01 custom bumper guard tallights

Making Custom Taillights – Lenses and All

By Curt Iseli   -   Photography By Cody Walls Custom taillights are a relatively simple modification that can make a significant visual impact—regardless of the model,...
01 1971 corvette detroit speed speedray ifs

Project 1971 Corvette is Outfitted with Detroit Speed SpeedRay IFS

By Barry Kluczyk   -   Photography By Brian Brennan Let’s be honest, vintage Corvettes look much better than they drive. The C2 (1963-67) and C3 (1968-82)...
01 1932 ford highboy roadster build lorenzini

1932 Ford Highboy Roadster has Coming Out 27 Years Later

By Kev Elliott Photography By The Author, Pete Chapouris III, Tony Thacker & the Veazie Bros. Illustration By Eric Brockmeyer Twenty-seven years, that's how long this roadster...
01 1971 plymputh duster AMD sheetmetal replacement bbt fabrications

1971 Duster Receives Fresh Sheetmetal

By Ron Covell   -   Photography By BBT Fabrications BBT Fabrications has built quite a reputation for creating over-the-top performance car projects. For this project, they...
01 eastwood optiflow roll on primer

OptiFlow is Eastwood’s New Roll On Primer

By John Gilbert   -   Photography By The Author Some projects are more exciting than others. One such tedious project is bodywork leading to primer. While...
01 1947 Ford coupe in shop fadeaway fender metalwork mockup traditional custom build

Bolt-On Fadeaway Fenders for Traditional Customs

By Curt Iseli   -   Photography By Cody Walls There are a handful of customizing tenets that define the early, traditional custom style. The first and...
01 2025 1972 nova suspension jegs caltracs

JEGS Calvert Racing CalTracs for Drag Cars

By Ron Ceridono   -   Photography By Brian Brennan Dean Livermore and the crew at Hot Rods By Dean (HRBD) have built some of the most...
01 1970 chevelle under hood custom metal work roadster shop

1970 Chevelle Cleaning up Under the Hood

By Ron Covell   -   Photography By Chris Gray & Elia Daoud When building a car, decisions are made at every step of the process that...
28 Dakota Digital six button remote ECD 200BT module Dremel rotary tool PAC 2800BT fan controller

Easy to Install Electrical Accessories on Your Hot Rod

By Ron Ceridono   -   Photography Courtesy of the Manufacturers We confess, we will always love bare bones, wind-in-your-face, traditional hot rods—we’re even partial to those...
01 POR 15 top coat prep station with technician inspecting can before application

POR-15 Keeps Rust at Bay

By John Gilbert   -   Photography By the Author Rust never sleeps, that is, until rusted iron or steel is painted with POR-15 rust-preventive coating. I...
01 Stainless steel hard lines AN fittings firewall bulkhead connections welded mounting points

Custom Plumbing and Exhaust Systems

By Ron Covell   -   Photography By Jay Doerfler We are continuing our investigation of the inspiring work being done on the 1969 Camaro project being...
01 1930s classic car body with metallic purple flake paint in professional spray booth

Carry Metalflake in Waterborne Clear

By John Gilbert   -   Photography by Tom Koppinger & Doug Jerger The range of colors for custom car paint expanded in 1960 with the introduction...
01 1967 Pontiac Firebird 400 hardtop with Rally II wheels and silver paint parked on wet asphalt

1967 Pontiac Firebird Sits on a Roadster Shop Chassis

By Ron Ceridono   -   Photography By Chadly Johnson When two heavy hitters in modern hot rodding combine forces to modify an iconic car, there’s no...
01 1965 Mustang Fastback shell prepped for roof replacement with structural components already restored

Replacing the Roof of a 1965 Mustang Fastback

By Ron Ceridono   -   Photography by Tate Radford We’ve been following along as Colin and Tate Radford of Radford Auto Body resurrect a 1965 Mustang...
01 1964 Pontiac GTO interior disassembly with stock tilt column removal and exposed under dash wiring

1964 GTO Gets Flaming River Tilt Column

By Ryan Manson   -   Photography By the Author Upgrading a classic muscle car isn’t unfamiliar territory to those who follow what we do here at...
01 1936 Ford Roadster AMBR winner olive green paint Hallock windshield Halibrand wheels show quality build

How the AMBR 1936 Ford Roadster Top was Made

By Ron Covell   -   Photography By Brian Brennan & Adam Banks We have covered the construction of Ross Myers’ fenderless 1936 roadster, built at Rad...
01 Edelbrock VRS 4150 carburetor being installed on a classic V8 with finned valve covers

All About the Edelbrock VRS-4150 Four Barrel Carb

By Ryan Manson   -   Photography & Videography By Ryan Foss Productions While the popularity of EFI has grown exponentially in recent years as kits became...
01 1969 Camaro bare metal body with front splitter and custom wheels

1969 Camaro Before The Paint

By Chuck Vranas   -   Photography By The Author While on the road recently for Modern Rodding, our journey took us to ABS Classic Muscle Car...

Search Our Site

More Modern Rodding
More Modern Rodding